PROPORTIONAL PRESSURE REDUCING VALVE 12VDC Part no. D-IPDAR43CIJ1L2500

Proportional Pressure Control - D-IPDAR43C illustration

Product may vary from image.

Size (BSP)
Max. flow (lpm)
3.8 lpm
Max. pressure (bar)
50
Symbol
Proportional pressure control symbol
Manfacturer
Hydrastore
Availability
Available from 29/08/25

£66.37 exc. VAT

Inline Valves from Hydrastore for free next day delivery (orders over £30, UK Mainland only)

We also offer International delivery (including Northern Ireland)

We offer a substantial selection of hydraulic components on our website manufactured by Hydrastore but if you are still unable to locate the parts you require, please contact our sales team and we'll help you find what you're looking for.

View other product configurations

Data sheets

Product Info

Up to 3.8 lpm

Direct Acting Proportional, Pressure Reducing/Relieving valve, Slip-in Type.

Operation

The D-IPDAR43C generates a variable pressure in response to a PWM (Pulse Width Modulated) current signal. With no current applied to the proportional solenoid, the inlet port 2 is blocked and the regulated port 3 is vented to port 1. As current is increased, fluid pressure is proportionally controlled at the regulated port 3. On attainment of proportionally determined pressure at 3, the cartridge shifts to block flow at 2, thereby regulating pressure at 3. In this mode, the valve also will relieve 3 to 1 at a variable value over the set reducing pressure.

This works with an external driver.

Notes

  • Inlet pressure 350 bar available on request.
  • Valve is not supplied with a body, but bodies are available on request.
  • PWM driver is available on request.

Valve Specifications

Flow Range (lpm) 3.8 lpm @ 8 bar Delta P
Controlled Pressure range (bar) 0-25 bar / 0-30 bar (see graph)
Reduced Pressure Tolerance +/- 5%
Max. Back-pressure at T port 20 bar
Internal Leakage 15ml/min. @ 35 bar inlet
35ml/min. @ 350 bar inlet
Hydraulic Oil General purpose hydraulic fluid
Viscosity Range 3 to 640 cSt
Filtration ISO 18/15/13
Operating Temp. -25 to 90?C
Flange Mounting Screws M4x10 / torque 4Nm
Cavity T043 (see cavity data page CAV-T043)
Weight - Valve only 0.25 kg

Coil Specifications

Current Supply PWM (Pulse Width Modulation)
Rated Current Range 200 - 1500 mA (12 Volts)
100 - 750 mA (24 Volts)
PWM or Super-imposed Dither Frequency 100 - 200 Hz
Coil Resistance (12 vdc) 5.4 Ohm +/- 5% at 20°C
Coil Resistance (24 vdc) 22 Ohm +/- 5% at 20°C
Max.Power Consumption 12 Watt (20°C)
Protection Degree IP67 according to IEC 529
Coil Termination Deutsch-Integral DT04-2P
Amp Junior Timer 84-9419

Other Products

Part no.SymbolDescriptionSize (BSP)Max. flow (lpm)Max. pressure (bar)AvailabilityPriceQty
D-IPDAR43CIJ1L2500D-IPDAR43CIJ1L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 12VDC3.8 lpm50Available from 29/08/25£66.37 
D-IPDAR43CIJ2L2500D-IPDAR43CIJ2L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 24VDC3.8 lpm50Available from 29/08/25£75.03

Please note that prices displayed are exclusive of carriage and VAT. These will be calculated and added at checkout.

Shipping Calculator

Free UK Mainland delivery on online orders over £30

Please let us know your Postcode (UK), or Country, so we can calculate the most cost-effective shipping method available.

Please note that this applies to UK shipping only

Delivery Info

UK Delivery

Our standard delivery service for online orders dispatched to a UK address is DPD Next Day Delivery.† 

 Applies to orders ready for dispatch by 3.00pm Monday to Friday. Orders are not shipped on weekends or bank holidays. Next day delivery may not be available for certain addresses in the following areas: Northern Ireland, Scotland, Isle of Man, Jersey or Guernsey.

If we are experiencing a high volume of orders, shipments may be delayed. If your shipment experiences a significant delay, we will contact you via email or phone.

UK Delivery Costs

Free UK mainland delivery applies to most orders over £30 (+VAT). For orders exceeding 30kg or requiring palletised delivery to ensure the goods arrive in good condition, a delivery surcharge may apply. We’ll contact you before dispatch if this applies.

Orders to UK mainland addresses under £30 (+VAT) are charged at £8 (+VAT). However, if the delivery postcode falls within a designated Ultra Low Emission Zone, a ULEZ surcharge will also apply.

Delivery is calculated automatically at the checkout based on your delivery postcode and the weight of the items in your basket. Item delivery costs can be checked using the shipping calculator on individual product pages before reaching checkout.

Deliveries to the Scottish Highlands, Scottish Islands, Channel Islands, Isle of Man, Isles of Scilly and other outlying areas will incur delivery charges based on weight and location, irrespective of order value.

Affected postcode ranges include:

Highlands and Islands Postcodes: AB31, AB33–AB38, AB44–AB45, AB53–AB56, FK17–FK22, HS, IV, KA27–KA28, KW, PA20–PA49, PA60–PA80, PH17–PH26, PH30–PH44, PH49–PH50, ZE.

Isle of Man, Channel Islands, Isle of Wight and Isles of Scilly Postcodes: IM, JE, GY, PO30-PO33. PO35-PO41, TR21-25.

If your order is being delivered to Northern Ireland (BT postcode), the delivery cost is calculated at the checkout and shipped using our International Delivery service. 

Northern Ireland & International Delivery

We offer international shipping to a number of countries via DHL Express Worldwide Export. Shipping costs depend on both the weight of the shipment and the destination country.

For European destinations (including Northern Ireland) shipping is automatically calculated at the checkout.

For other international destinations, your order will be submitted as an enquiry to the Hydrastore office. We will then contact you with the shipping cost and arrange payment before dispatch.

Customs, Duties & taxes

Import duties, taxes, and brokerage fees are not included in the product price or shipping cost and are the buyer’s responsibility. We recommend checking with your local customs office to understand any potential fees prior to placing an order. Buyers are also responsible for ensuring compliance with their country’s import laws and regulations. 

By placing an international order (outside the UK and including Northern Ireland), you accept these responsibilities. We are not liable for any losses, including product or shipping costs, if customs seize or destroy the item(s).

 

Get in touch to discuss your requirements

01427 874445
sales@hydrastore.co.uk