Hydrastore Proportional Pressure Control - D-IPDAR43C

Products may vary from image.

Product information

Up to 3.8 lpm

Direct Acting Proportional, Pressure Reducing/Relieving valve, Slip-in Type.

Operation

The D-IPDAR43C generates a variable pressure in response to a PWM (Pulse Width Modulated) current signal. With no current applied to the proportional solenoid, the inlet port 2 is blocked and the regulated port 3 is vented to port 1. As current is increased, fluid pressure is proportionally controlled at the regulated port 3. On attainment of proportionally determined pressure at 3, the cartridge shifts to block flow at 2, thereby regulating pressure at 3. In this mode, the valve also will relieve 3 to 1 at a variable value over the set reducing pressure.

This works with an external driver.

Notes

  • Inlet pressure 350 bar available on request.
  • Valve is not supplied with a body, but bodies are available on request.
  • PWM driver is available on request.

Valve Specifications

Flow Range (lpm) 3.8 lpm @ 8 bar Delta P
Controlled Pressure range (bar) 0-25 bar / 0-30 bar (see graph)
Reduced Pressure Tolerance +/- 5%
Max. Back-pressure at T port 20 bar
Internal Leakage 15ml/min. @ 35 bar inlet
35ml/min. @ 350 bar inlet
Hydraulic Oil General purpose hydraulic fluid
Viscosity Range 3 to 640 cSt
Filtration ISO 18/15/13
Operating Temp. -25 to 90?C
Flange Mounting Screws M4x10 / torque 4Nm
Cavity T043 (see cavity data page CAV-T043)
Weight - Valve only 0.25 kg

Coil Specifications

Current Supply PWM (Pulse Width Modulation)
Rated Current Range 200 - 1500 mA (12 Volts)
100 - 750 mA (24 Volts)
PWM or Super-imposed Dither Frequency 100 - 200 Hz
Coil Resistance (12 vdc) 5.4 Ohm +/- 5% at 20°C
Coil Resistance (24 vdc) 22 Ohm +/- 5% at 20°C
Max.Power Consumption 12 Watt (20°C)
Protection Degree IP67 according to IEC 529
Coil Termination Deutsch-Integral DT04-2P
Amp Junior Timer 84-9419

Product Specification Document

Providing further details on product specifications and dimensions

Ordering chart

Part no.SymbolDescriptionSize (BSP)Max. flow (lpm)Max. pressure (bar)PriceQtyDownload symbols
D-IPDAR43CIJ1L2500D-IPDAR43CIJ1L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 12VDC3.8 lpm50£66.37
D-IPDAR43CIJ2L2500D-IPDAR43CIJ2L2500 symbolPROPORTIONAL PRESSURE REDUCING VALVE 24VDC3.8 lpm50£75.03

Please note that prices displayed are exclusive of carriage and VAT. These will be calculated and added at checkout.